Sherwood VR-758 User Manual page 49

Continued
When selecting the PASSWORD
Press the CURSOR
1
Press the CURSOR
2
Input 4-digit passwords in sequence for old password, new password and confirmation, then press
the ENTER button.
3
• When each password is input correctly, the previous menu screen is displayed.
• While displaying the password change page screen, when the SETUP button is pressed, the setup mode is
canceled.
Note :
• Do not forget the password.
If you forgot your password, input "3308" that has been set to at factory.
Press the CURSOR
4
Set other setups to your preference.
5
To return to the main setup menu screen
• Press the CURSOR button to select the item menu, press the CURSOR
PAGE" and press the ENTER button.
Then the main setup menu screen will be displayed.
• When the RETURN button is pressed repeatedly, the main setup menu screen will be displayed, and then the
setup mode is canceled.
/ buttons to select the PASSWORD.
button to select the CHANGE, then press the ENTER button.
button to select the item menu.
RC
50
• Each time the CURSOR
the item menu or the setting menu is selected.
/ buttons to select "MAIN
or button is pressed,