Sherwood VR-758 User Manual page 52

Presetting radio stations
• You can store up to 30 preferred stations in the memory.
Tune in the desired station with auto or manual tuning.
1
Press the MEMORY/ENTER button.
Main unit
2
MEMO/ENTER
Select the desired preset number(1~30) and press the MEMORY/ENTER button.
3
Main unit RC
ADJUST
PRESET
or
• The stations has now been stored in the memory.
• When using the NUMERIC buttons, the station is stored automatically without pressing the MEMORY/ENTER button.
• A stored frequency is erased from the memory by storing another frequency in its place.
• If "MEMO" goes off, start again from the above step 2.
Repeat the above steps 1 to 3 to memorize other stations.
4
MEMORY BACKUP FUNCTION
The following items, set before the unit is turned off, are memorized.
• INPUT SELECTOR settings
• Surround mode settings
Tuning to preset stations
After selecting the tuner as input source, select the preset mode.
1
Main unit
Select the desired preset number.
2
Main unit
ADJUST
• When selecting the desired preset number with the NUMERIC buttons or PRESET UP(+)/DOWN(-) buttons, the
desired preset station will be tuned to automatically without selecting the preset mode.
RC
ENTER
or
RC
Main unit
MEMO/ENTER
TUNING
or
• Speaker settings
• Preset stations, etc.
T/P MODE
RC
PRESET
or
53
• "MEMO" is flickering for 5 seconds.
• When using the NUMERIC buttons
on the remote control.
RC
Examples)
ENTER
For "3" :
or
For "21" :
For "30" :
• Then "CH" light up.
• When using the NUMERIC buttons on the remote
control.
Examples)
For "3" :
3
within 2 seconds within 2 seconds
For "21" :
+ 10 + 10
within 2 seconds within 2 seconds
For "30" :
+ 10 + 10
3
within 2 seconds within 2 seconds
+ 10 + 10 1
within 2 seconds within 2 seconds
+ 10 + 10 + 10
1
+ 10