Sherwood VR-758 User Manual page 44

Continued
When selecting the SCART VIDEO
• For some countries like Europe, this DVD player incorporates the A/V SCART connector which can deliver either the
COMPOSITE(regular) video or the S-VIDEO(Y and C) signals as well as the audio L and R signals for easy connection.
• When the SCART connections between the unit and video components are made, depending on whether you use the
COMPOSITE(regular) video signal from the SCART connector or the S-VIDEO signals, you can select either the
COMPOSITE(regular) video or the S-VIDEO.
Note :
• Be sure to set your TV and VCR to the corresponding one of the COMPOSITE (regular) video and S-VIDEO modes to
match the SCART VIDEO setting of the DVD player.(Refer to the operating instructions of the component(s) connected.)
Press the CURSOR
1
Press the CURSOR
2
Press the CURSOR
3
RC
Press the CURSOR
4
Set other setups to your preference.
5
To return to the main setup menu screen
• Press the CURSOR button to select the item menu, press the CURSOR
press the ENTER button.
Then the main setup menu screen will be displayed.
• When the RETURN button is pressed repeatedly, the main setup menu screen will be displayed, and then the setup
mode is canceled.
/ buttons to select the SCART VIDEO.
button to select the video signal menu.
RC
/ buttons to select the preferred video signal, then press the ENTER button.
RC
ENTER
button to select the item menu.
RC
45
• Each time the CURSOR
the video signal menu or the item menu is selected.
• The selected video signal is colored.
• Each time the CURSOR
the item menu or the video signa menu is selected.
/ buttons to select "MAIN PAGE" and
or button is pressed,
or button is pressed,