Digital Audio Recording With Md Recorder - Sherwood VR-758 User Manual

DIGITAL AUDIO RECORDING WITH
• When the OPTICAL DIGITAL OUT of this unit is connected to the OPTICAL DIGITAL IN of an MD or CD
recorder, you can enjoy high-quality sound of digital recording, without converting the original signals. Refer to
"Connecting audio/video components" on page 6 and "Connecting DIGITAL INs and OUT" on page 7 and the
operating instructions of the MD recorder or CD recorder.
Notes :
• Digital recording is available for the digital audio program sources such as CDs, MDs and some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating
instructions of your digital recording equipment to know what restrictions are imposed.
Select a desired input other than TUNER as a recording source.
1
Main unit
INPUT
SELECTOR
For digital recording, select the desired digital input as the recording signal input.
2
Main unit
Start recording on the component connected to OPTICAL DIGITAL OUT.
3
Start play on the desired input.
4
RC
INPUT
SEL.
or
DIGITAL
INPUTS
57
• Each time this button is pressed, the corresponding
input is selected as follows :
OP(tical) 1 OP(tical) 2
Notes :
• When the selected digital input is not connected,
recording cannot be performed.
• When DVD is selected as recording source, the
digital signals will be automatically output from the
unit's OPTICAL DIGITAL OUT as well as
reproduced.
CO(axial) AN(alog)