Operations; Listening To A Program Source - Sherwood R-945MKII Operating Instructions Manual

Table of Contents

Advertisement

Operations

Note: Before operating this receiver with the supplied remote control, refer to "Universal Remote Control" on
page 8 for details about operation.

LISTENING TO A PROGRAM SOURCE

Turn the power on.
1
POWER
or
Each time the POWER button is pressed, the
receiver is turned on to enter the operating mode or
off to enter the standby mode.
In the standby mode, if the INPUT SELECTOR
button is pressed on the remote control, the
receiver is turned on automatically and the desired
input is selected.
In the standby mode, the STANDBY indicator
lights up. This means that the receiver is not
disconnected from the AC outlet and a small
amount of current is retained to support the
memorized contents and operation readiness.
Switch the speakers on.
2
Then sound can be heard from the speakers
connected to the speaker terminals.
When using the headphones for private listening,
press the SPEAKER switch again to switch the
speakers off.
or
SPEAKER
ON/
OFF
Select the desired input source.
3
INPUT SELECTOR/
INDEX
Each time the INPUT SELECTOR/INDEX knob is
rotated, the input source changes as follows:
PHONO
TUNER
(frequency display)
AUX/TV
VCR1
When the TAPE 2 MONITOR button is set to on and
"TAPE 2M" indicator lights up, other inputs can not
be heard from the speakers.
To listen to a input source other than TAPE 2
MONITOR, be sure to set the TAPE 2MONITOR
button to off.
TAPE 2 MONITOR function
You can connect either a tape deck or a graphic
equalizer to the receiver's TAPE 2 MONITOR jacks.
When listening to the component connected to
these jacks,set the TAPE 2 MONITOR button to on.
If you connect a 3-head tape deck, you can listen to the
sound being recorded during recording, instead of the
source sound.
For further details, refer to the operating instructions
of the component connected.
When the AUX/TV is selected as input source
Select the front AUX or the rear TV.
If the front AUX is selected, the FRONT AUX
indicator lights up.
12
T. 2 MONITOR
or
CD PLAYER
TAPE 1
LD PLAYER
DVD
FRONT
AUX SEL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents