I Dv Set Mode Items - Icom IC-91A Instruction Manual

11
MENU SCREEN OPERATION

I DV set mode items

The following items are selectable by the IC-91AD or optional
UT-121 is installed into the IC-91A.
D D Auto reply
This function replies to an individual station call even you are
away from the transceiver.
After the manual transmission (pushing [PTT]), the Auto
Reply setting returns to OFF automatically.
• OFF : No reply is performed even a call is received.
(default)
• ON : Sets caller's call sign and reply to the call with
the set own call sign automatically.
• VOICE : Sets caller's call sign and reply to the call with
the recorded audio in REPLY VOICE memory of
DV VOICE MEMO.
AUTO REPLY AUTO REPLY
OFF OFF
r
ON ON
VOICE VOICE
D D Digital code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available.
DIGITAL CODE DIGITAL CODE
00 00
92
AUTO REPLY
OFF OFF
ON ON
VOICE VOICE
r
(default: 00)
DIGITAL CODE
99 99
D D DV data TX
During slow-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
DV DATA TX
PTT PTT
r
AUTO AUTO
D D Digital monitor
Sets the desired monitoring mode during digital mode opera-
tion from "Auto," "Digital" and "Analog."
• AUTO : The transceiver selects monitoring mode from
FM and DV according to the received signal.
(default)
• DIGITAL : Monitors in DV mode.
• ANALOG : Monitors in FM mode.
DIGITAL MONITOR
AUTO AUTO
r
DIGITAL DIGITAL
ANALOG ANALOG
(default: PTT)
DV DATA TX
PTT PTT
AUTO AUTO
r
DIGITAL MONITOR
AUTO AUTO
DIGITAL DIGITAL
r
ANALOG ANALOG