I Copying The Call Sign - Icom IC-91A Instruction Manual

7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)

I Copying the call sign

D D Copying the call sign memory contents
This function is convenient when saving with additional notes
for areas
(for mobile operation)
transceivers are available)
sign.
NOTE: Make sure that the "EDIT RECORD" item in DV set
mode is set to "AUTO" or "SELECT" in advance. (p. 00)
qDuring DV mode operation, enter call sign set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
• CALL SIGN screen is displayed.
wRotate [DIAL]
†
to select "UR," "R1" or "R2" as desired, then
push [5/SKIP](ï)
eRotate [DIAL]
†
to select the desired call sign channel to be
copied.
• M01–M06, U01–U60 and R01–R60 are available.
48
or unit number/initials
, or modifying a part of the current call
CALL SIGN
†
, then push [5/SKIP](ï)
†
.
• When "AUTO" is set to "EDIT RECORD" item
r Push [6/M.N](≈ ≈ ) to select the call sign programming mode.
• A blank channel is selected automatically.
(if several
• The 1st digit of the selected call sign blinks.
YOUR CALL SIGN YOUR CALL SIGN
U21
r
†AAAAA
:SET :SET
:SEL :SEL
:CUR :CUR
tEdit or modify the selected call sign as described in "D Sta-
tion call sign programming"
†
.)
programming"
yPush [5/SKIP](ï) to store the edited/modified call sign into
the selected blank channel.
NOTE: The message "FULL" is displayed when no blank
channel is available in station or repeater call sign mem-
ory.
Select the desired call sign channel number as described
in step u of "• When "SELECT" is set to "EDIT RECORD"
item" at right page in this case.
AB A blank channel
AAAAA
number blinks.
CLR:CLR CLR:CLR
A/a:CHAR A/a:CHAR
0:CQ 0:CQ
or "D Repeater call sign
(p. 00)
.
(p. 00)