I Scan Set Mode Items - Icom IC-91A Instruction Manual

11
MENU SCREEN OPERATION

I Scan set mode items

D D Priority watch
Activates priority watch or priority watch with alert
• OFF : The priority watch is turned OFF.
• ON : The transceiver checks the memory channel fre-
quency every 5 sec.
• BELL : The transceiver checks the memory channel fre-
quency every 5 sec. You can be alerted with
beeps and blinking "S".
PRIO WATCH PRIO WATCH
OFF OFF
r
ON ON
BELL BELL
D D Scan pause timer
Selects the scan pause time. When receiving signals, the
scan pauses according to the scan pause time.
• 2–20 SEC : Scan pauses for 2–20 sec. on a received
signal in 2 sec. steps.
• HOLD : Scan pauses on a received signal until it dis-
appears. Rotate [DIAL] to resume manually.
PAUSE TIMER
4SEC 4SEC
6SEC 6SEC
8SEC 8SEC
10SEC 10SEC
r
12SEC 12SEC
96
.
(Bell)
(default)
PRIO WATCH
OFF OFF
ON ON
BELL BELL
r
(default: 10 sec.)
PAUSE TIMER
14SEC 14SEC
16SEC 16SEC
18SEC 18SEC
20SEC 20SEC
HOLD HOLD
r
D D Scan resume timer
Selects the scan resume time of a paused frequency after the
received signal disappears.
• 0 : Scan resumes when a received signal disap-
pears.
• 1–5 SEC : Scan pause 1–5 sec. after a received signal
disappears.
(default: 2 sec.)
• HOLD : Scan pauses on the received signal even if it
disappears. Rotate [DIAL]
ally.
RESUME TIMER
1SEC 1SEC
2SEC 2SEC
r
3SEC 3SEC
4SEC 4SEC
5SEC 5SEC
Scan resume timer must be set shorter than scan pause
timer , otherwise this timer does not activate.
(previous item)
† to resume manu-
RESUME TIMER
2SEC 2SEC
3SEC 3SEC
4SEC 4SEC
5SEC 5SEC
HOLD HOLD
r