Icom IC-91A Instruction Manual page 61

D D Voice memory recording for automatic reply
IMPORTANT!
Deactivate the dualwatch function and set minimum [VOL]
level when recording the DV voice memo.
Otherwise the received audio or unwanted noise from A
band is also recorded into the voice memory.
q Enter "RELY VOICE" in DV voice memo set mode.
➪
MENU screen DV VOICE MEMO
(Push [MENU/LOCK]) (Rotate [DIAL]
• REPLY VOICE screen is displayed.
REPLY VOICE REPLY VOICE
REPLY V REPLY V
r
:
:BACK :BACK
wWhile pushing and holding [PTT], speak into the micro-
phone.
• Up to 10 second message is recordable.
• The recording stops after 10 second or when [PTT] is released.
e Push [4/DUP](Ω) to return to DV VOICE MEMO screen.
r Push [MENU/LOCK] to return to frequency indication.
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
➪
REPLY VOICE
† †
, then push [5/SKIP](ï)
G
PTT: PTT:
CLR:CLR CLR:CLR
D D Play-back or erase the voice memory
q Push [MENU/LOCK] to select menu mode indication.
wRotate [DIAL] †
to select "DV VOICE MEMO," then push
†
[5/SKIP](ï) .
eRotate [DIAL]
†
†
[5/SKIP](ï) .
• REPLY VOICE screen is displayed.
rTo play-back the recorded voice memory, push
[5/SKIP](ï).
• Push [5/SKIP](ï) again to pause, push [6/M.N](≈ ≈ ) to cancel the
.)
play-back.
tTo erase the recorded voice memory, push and hold
[1/SCOPE](CLR) for 1 sec.
[DIAL] ↔ [2/SCAN](∫ ∫ )/[8/TS](√ √ )
†
to select "REPLY VOICE," then push
[5/SKIP](ï) ↔ [6/M.N](≈ ≈ )
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
55