Icom IC-91A Instruction Manual page 69

N Playing-back and erasing the recorded audio
q Enter "TRACK" in DV voice memo set mode.
➪
MENU screen DV VOICE MEMO
(Push [MENU/LOCK]) (Rotate [DIAL]
• TRACK screen is displayed
TRACK TRACK
TRACK:1 TRACK:1
r
:SEL :SEL
:BACK CLR:CLR :BACK
wRotate [DIAL] †
to select the desired audio track to be play-
back or erased.
• "✱" is displayed beside the track number when the selected track
has been recorded.
ePush [5/SKIP](ï) to play-back the recorded audio.
• Push [5/SKIP](ï) again to pause, push [6/M.N](≈ ≈ ) to stop play-
back.
rPush and hold [1/SCOPE](CLR) for 1 sec. to erase the
recorded audio.
t Push [4/DUP](Ω Ω ) to return to DV VOICE MEMO screen.
y Push [MENU/LOCK] to return to frequency indication.
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
➪
TRACK
† †
, then push [5/SKIP](ï)
*
:
CLR:CLR
D D DV automatic detect
The "DV" mode indicator blinks when other than DV mode
signal is received during DV mode operation.
The IC-91A/91AD has DV automatic detection that selects
and monitors in FM mode when other than DV mode signal is
.)
received.
q Enter "AUTO DETECT" in DV set mode.
➪
MENU screen
(Push [MENU/LOCK]) (Rotate [DIAL]
wRotate [DIAL]
†
to turn the DV automatic detect function ON
and OFF.
OFF : "DV" mode indicator blinks, however the trans-
ceiver receives in DV mode even other than DV
mode signal is received.
ON : "DV" mode indicator blinks and the transceiver
monitors the signal in FM mode.
e Push [5/SKIP](ï) to return to DV SET MODE screen
r Push [MENU/LOCK] to return to frequency indication.
NOTE: The received FM audio may be distorted when re-
ceiving an FM signal with DV automatic detect function.
[DIAL] ↔ [2/SCAN](∫ ∫ )/[8/TS](√ √ )
†
➪
DV SET MODE AUTO DETECT
†
, then push [5/SKIP](ï)
[5/SKIP](ï) ↔ [6/M.N](≈ ≈ )
7
1
2
3
4
5
6
†
.)
7
8
9
10
11
12
13
14
15
16
17
18
19
63