Dv Set Mode Items; Digital Code; Auto Reply - Icom IC-92AD Instruction Manual

12
MENU SCREEN OPERATION

■ DV set mode items

The following items are selectable for B band.
D Auto reply
This function replies to an individual station call even you are
away from the transceiver.
After a manual transmission (pushing [PTT]), the Auto Reply
setting returns to OFF automatically.
• OFF : No reply is performed even if a call is received.
(default)
• ON : Sets the caller's call sign and replies to the call
with the programmed own call sign.
• VOICE : Sets caller's call sign and replies to the call with
the recorded audio in REPLY VOICE memory
of DV VOICE MEMO.

AUTO REPLY

AUTO REPLY
r
OFF OFF
ON ON
VOICE VOICE
NOTE: When "ON" or "VOICE" is set in the auto reply
function, the power save function
automatically to receive call sign signal properly.
100
AUTO REPLY AUTO REPLY
OFF OFF
ON ON
r
VOICE VOICE
stop functioning
(p. 96)
D Digital code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available.

DIGITAL CODE

DIGITAL CODE
00 00
D DV data TX
During low-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack.
DV DATA TX DV DATA TX
r
PTT PTT
AUTO AUTO
• PTT : Data from [DATA/SP/MIC] transmits when
[PTT] is pushed. (default)
• AUTO : Data from [DATA/SP/MIC] transmits automati-
cally.
(default: 00)
DIGITAL CODE DIGITAL CODE
99 99
(default: PTT)
DV DATA TX DV DATA TX
PTT PTT
r
AUTO AUTO