Fineline User Interface & Cutlinc Server; Ethernet Router/Switch - Lincoln Electric FineLine 170HD Operator's Manual

FineLine 170HD Plasma System
2.10 FineLine User Interface & CutLinc Server
A Human Machine Interface (HMI) is required to run the FineLine Plasma System.
The HMI can be a CNC Controller or Industrial Computer running the FineLine User
Interface (UI) and CutLinc Server.
The FineLine UI is the user interface for the FineLine Plasma System. CutLinc
Server is the communication hub for the FineLine Plasma System. They are already
integrated into certain Lincoln Electric HMIs. Other HMIs require both to be
integrated by the OEM or end-user.
Specifications for the HMI:
 Windows 10 operating system
 One (1) Ethernet port
Specifications for the FineLine UI and CutLinc Server:
 Controls up to four FineLine 170HD Systems

2.11 Ethernet Router/Switch

A user-supplied Ethernet router/switch is required with the following specifications:
 Four (4) Channel (minimum)
 10/100 Mbps (minimum)
 IEEE 802.3(x) Compliant
 Auto MDI / MDIX
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Page 20 of 132
BK8053-000111 Rev D