Lincoln Electric SPEEDTEC 180C Operator's Manual
Hide thumbs
Also See for SPEEDTEC 180C:
- Technical specifications (4 pages) ,
- Operator's manual (18 pages)
Related Manuals for Lincoln Electric SPEEDTEC 180C
Summary of Contents for Lincoln Electric SPEEDTEC 180C
- Page 1 IM3039 08/2020 REV08 SPEEDTEC 180C & 200C OPERATOR’S MANUAL ENGLISH Lincoln Electric Bester Sp. z o.o. ul. Jana III Sobieskiego 19A, 58-263 Bielawa, Poland www.lincolnelectric.eu...
-
Page 2: Table Of Contents
12/05 THANKS! For having chosen the QUALITY of Lincoln Electric products. Please Examine Package and Equipment for Damage. Claims for material damaged in shipment must be notified immediately to the dealer. For future reference record in the table below your equipment identification information. Model Name, Code & Serial Number can be found on the machine rating plate. -
Page 3: Technical Specifications
Technical Specifications NAME INDEX SPEEDTEC 180C K14098-1 SPEEDTEC 200C K14099-1 INPUT 180C 200C Input Voltage U 230 Vac ± 10%, 1-phase 115 Vac ± 10%, 1-phase 230 Vac ± 10%, 1-phase Frequency 50/60 Hz Input Amperes I 1max 2,6kVA @ 40% Duty 6,2kVA @ 25% Duty Input Power at Rated Cycle (40°C) 6,2kVA @ 25% Duty Cycle... - Page 4 DIMENSION Weight Height Width Length 180C 17,3 kg 396 mm 246 mm 527 mm 200C WIRE DIAMETER / WIRE FEED SPEED RANGE WFS RANGE Solid wires Aluminum wires Cored wires 180C 1.5 ÷ 15 m/min 0.6 ÷ 1.0 0.9 ÷ 1.1 200C 1.5 ÷...
-
Page 5: Eco Design Information
ECO design information The equipment has been designed in order to be compliant with the Directive 2009/125/EC and the Regulation 2019/1784/EU. Efficiency and idle power consumption: Efficiency when max power Index Name Equivalent model consumption / Idle power consumption K14098-1 SPEEDTEC-180C 230V1PH 81,6% / 42W No equivalent model... - Page 6 Typical gas usage for MIG/MAG equipment: DC electrode positive Wire Wire Feeding Gas flow Material type diameter Shielding Gas Current Voltage [m/min] [l/min] [mm] Carbon, low 0,9 ÷ 1,1 95 ÷ 200 18 ÷ 22 3,5 – 6,5 Ar 75%, CO alloy steel Aluminium 0,8 ÷...
-
Page 7: Electromagnetic Compatibility (Emc)
Lincoln Electric. Before installing the machine, the operator must check the work area for any devices that may malfunction because of electromagnetic disturbances. -
Page 8: Safety
Failure to follow the instructions in this manual could cause serious personal injury, loss of life, or damage to this equipment. Read and understand the following explanations of the warning symbols. Lincoln Electric is not responsible for damages caused by improper installation, improper care or abnormal operation. - Page 9 WELDING SPARKS CAN CAUSE FIRE OR EXPLOSION: Remove fire hazards from the welding area and have a fire extinguisher readily available. Welding sparks and hot materials from the welding process can easily go through small cracks and openings to adjacent areas. Do not weld on any tanks, drums, containers, or material until the proper steps have been taken to insure that no flammable or toxic vapors will be present.
-
Page 10: Introduction
Introduction The welding machines SPEEDTEC 180C enables For GMAW and FCAW-SS process, the technical welding: specification describes: GMAW (MIG/MAG) Type of welding wire FCAW-SS Wire diameter SMAW (MMA) Recommended equipment, which can be bought by user, was mentioned in the chapter "Accessories". - Page 11 1. LED Indicator Power switch (only softer and during welding is less SPEEDTEC 180C): This LED lights up spatters. when the welding machine is ON and is SMAW ARC FORCE: The output current ready to work process...
- Page 12 15. Escape Button (right): 18. Power Lead with Plug (3m): Power lead with plug is a standard equipment. Connect the power lead with Cancels an action / exit menu. plug to the main supply before turning power on. Locks and unlocks knobs and buttons on the panel (press and hold button for 4 seconds).
- Page 13 Table 1 Table 2 English English...
- Page 14 Loading the Electrode Wire Adjusting of Force of Pressure Roll Force Turn the machine off. Open the side cover of the machine. The pressure arm controls the amount of force the drive Unscrew the locking nut of the sleeve. rolls exert on the wire.
- Page 15 Welding GMAW, FCAW-SS Process 2-Step / 4-Step Burnback SPEEDTEC 180C and SPEEDTEC 200C can be used to Run-in WFS welding GMAW and FCAW-SS process. Spot Time SPEEDTEC 200C has been provided with synergic ...
- Page 16 Welding SMAW (MMA) Process The welding load voltage can be changed depend on the value of parameters are set by operators: SPEEDTEC 180C and SPEEDTEC 200C does not SPEEDTEC 200C include the electrode holder with lead necessary for SMAW welding, but the one can be purchased...
- Page 17 Depending on welding machine, the user can set Memory – Save, Recall, Delete (only functions: SEEDTEC 200C) SPEEDTEC 180C SPEEDTEC 200C enables saving, recalling and deleting The welding current the parameter’s settings. 9 memories can be used by ...
- Page 18 Guide’s Marking Interface SPEEDTEC 200C Description of the user interface in "Quick Guide" chapter Select Welding Process SMAW (MMA) Welding Basic menu GMAW (MIG/MAG) Burnback Brightness Level Manual Welding View Software and FCAW- Self shielded Run-in WFS Hardware Version Manual Welding Information GMAW (MIG/MAG) Preflow Time...
- Page 19 Lincoln Electric is not in a position to warrant or Any noticeable damage should be reported immediately guarantee such advice, and assumes no liability, with and repaired.
-
Page 20: Weee
12/05 Part list reading instructions Do not use this part list for a machine if its code number is not listed. Contact the Lincoln Electric Service Department for any code number not listed. Use the illustration of assembly page and the table below to determine where the part is located for your particular code machine. -
Page 21: Accessories
Accessories K10413-15-3M The gas-cooled gun LG150 to GMAW process - 3m. KP10461-1 Gas nozzle conical Ø12mm. KP10440-06 Contact Tip M6x25mm ECu 0.6mm KP10440-08 Contact Tip M6x25mm ECu 0.8mm KP10440-09 Contact Tip M6x25mm ECu 0.9mm KP10440-10 Contact Tip M6x25mm ECu 1.0mm KP10440-10A Contact Tip M6x25mm Al 1.0mm KP10468...