Lincoln Electric FineLine 170HD Operator's Manual page 2

FineLine 170HD Plasma System
Revision History
Rev Date
D 11/2022
Trademark Notice
FineLine, CutLinc, Magnum, Burny, Inova, and the Lincoln Electric logo are registered trademarks
of Lincoln Global, Inc. All other trademarks are property of their respective owners.
Please examine carton and equipment for damage immediately
When this equipment is shipped, title passes to the purchaser upon receipt by the carrier.
Consequently, claims for material damaged in shipment must be made by the purchaser against
the transportation company at the time the shipment is received.
Customer Assistance Policy
The business of The Lincoln Electric Company is manufacturing and selling high quality welding
equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our
customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for
advice or information about their use of our products. We respond to our customers based on the
best information in our possession at that time. Lincoln Electric is not in a position to warrant or
guarantee such advice, and assumes no liability, with respect to such information or advice. We
expressly disclaim any warranty of any kind, including any warranty of fitness for any customer's
particular purpose, with respect to such information or advice. As a matter of practical
consideration, we also cannot assume any responsibility for updating or correcting any such
information or advice once it has been given, nor does the provision of information or advice
create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by
Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer.
Many variables beyond the control of Lincoln Electric affect the results obtained in applying these
types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of
printing. Please refer to www.lincolnelectric.com for any updated information.
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
Section 5.3 retract within 15mS. Section 4.4.5 TTS 9.5s. Added Section 6.5.1. Added
Section 4.2.4. Section 4.4 updated Settings screens. Section 7.2.2 added event
codes. Section 3.5 remove inrush current. Added CutLinc trademark. Updated for CE
code break G10176-3/13526.
THANK YOU FOR SELECTING
QUALITY EQUIPMENT BY
LINCOLN ELECTRIC.
Page 2 of 132
Description of Change
BK8053-000111 Rev D