Jumper Jp1 Installing/Removing; Jumper Jp1 - Intel AC450NX Product Manual

AC450NX Rack Server System Product Guide

Jumper JP1 Installing/Removing

See Figure 20-1.
1. Shut down the server and disconnect it from its power source.
2. Remove the memory module cover as described in Chapter 12, "Server Covers:
Removing/Reinstalling."
3. Remove the peripheral bay as described in Chapter 13, "Server Components:
Removing/Reinstalling.".
4. Install or remove the jumper.
5. Reinstall the peripheral bay.
6. Reinstall the memory module cover as described in Chapter 12, "Server Covers:
Removing/Reinstalling."
7. Reconnect the server to power and start the server.
250
Figure 20-1. Jumper JP1
OM07348