Intel AC450NX Product Manual page 54

Server Menu (continued)
Feature Option
Baud Rate 9600
19.2 K
38.4 K
115.2 K
Flow Control No Flow Control
CTS/RTS
XON/XOFF
CTS/RTS + CD
Processor Retest No
Yes
EMP Password Switch Disabled
Enabled
EMP ESC Sequence
EMP Hangup Line
String
Modem Init String
EMP Access Mode Preboot Only
Always Active
Disabled
EMP Restricted Mode Disabled
Access Enabled
EMP Direct Direct Connect
Connect/Modem Modem Mode
Mode
Chapter 4 Setup Utility: When to Run
Description
Select the baud rate.
Select the flow control.
•
CTS/RTS = Hardware
•
XON/XOFF = Software
•
CTS/RTS + CD = Hardware + carrier detect for
modem use.
Yes causes the BIOS to clear historical processor status
and retest all processors on the next boot.
Enable or disable the EMP password.
The front panel controller firmware updates this field.
The front panel controller firmware updates this field.
This string accepts up to 16 characters. The upper four
characters will go to the next field which will pop up as
soon as the 16th character is filled. Trying to fill the 17th
character in the same field will have a wraparound
problem.
Preboot Only—EMP enabled during power down or
POST.
Always Active—EMP always enabled.
Disabled—EMP disabled.
When enabled, power down, front panel NMI, and reset
control via EMP are disabled. Restricted mode can be
selected with preboot or always active.
You can connect directly to the port or use a modem.
53