Peripheral Bay Blindmate Board; Removing The Peripheral Bay Blindmate Board; Reinstalling The Peripheral Bay Blindmate Board - Intel AC450NX Product Manual

AC450NX Rack Server System Product Guide

Peripheral Bay Blindmate Board

Removing the Peripheral Bay Blindmate Board

1. Observe the precautions on page 115, "Safety Guidelines."
2. Remove the top cover as described in Chapter 12, "Server Covers: Removing/Reinstalling."
3. Remove the fan array housing as described earlier.
4. Remove the CPU tray as described earlier.
5. Remove the peripheral bay as described earlier.
6. Tag and disconnect all cables to the board.
7. Remove and save the screws that attached the board to the chassis and remove the board.
8. Place the board on a nonconductive, static-free surface, or store it in an antistatic protective
wrapper.

Reinstalling the Peripheral Bay Blindmate Board

1. Remove the board from the antistatic protective wrapper if you placed it in one.
2. Attach the board to chassis.
3. Connect all cables.
4. Reinstall the peripheral bay as described earlier.
5. Reinstall the CPU tray as described earlier.
6. Reinstall the fan array housing as described earlier.
7. Reinstall the top cover as described in Chapter 12, "Server Covers: Removing/Reinstalling."
162