Hot-Swappable Fans: Hot Swapping; Tools And Supplies You Need; Equipment Log - Intel AC450NX Product Manual

9 Hot-swappable Fans: Hot Swapping

This chapter tells how to hot-swap a fan.
When the yellow fan failure LED on the front panel turns on, you can determine which fan is
defective by checking the yellow fan failure LEDs mounted next to each fan. When a fan fails, the
LED will be on continuously. However, you do not need to shut the server down to hot-swap a
failed fan.

Tools and Supplies You Need

•
Phillips (cross-head) screwdriver (#2 bit)
•
Antistatic wrist strap (recommended)
•
Pen or pencil

Equipment Log

Use the equipment log form provided in Appendix B, "Equipment Log," to record the model and
serial numbers of the server, all installed options, and any other pertinent information about the
server.
97