Table of Contents
Advertisement
22 Solving Problems: Troubleshooting/Error
Messages
This chapter helps you identify and solve problems that might occur while you are using the
server.
For detailed instructions about removing or installing a component or checking jumpers, see the
chapter whose number appears in parentheses after a given checklist item. Also check the
Contents and Index for specific page locations.
Warnings and Cautions
Only a qualified service technician is authorized to remove the server covers and to access any
of the components inside the server. Before removing the covers, see "Safety Guidelines" on
page 115.
Resetting the Server
You can reset the server in several ways.
Manually
Press
<Ctrl+Alt+Del>
Reset button
Power off/on
Programmed
You can reset the server with software.
To
Clear server memory and reload the operating system. This is a "soft boot" reset.
Clear server memory, restart POST, and reload the operating system.
Turn the server power off and then on. This is a "cold boot" reset; it has the same
effect as pushing the reset button except that power is halted to all peripherals.
261
Advertisement
Table of Contents
Troubleshooting
