Ricoh R-C4 Service Manual page 258

SERVICE PROGRAM MODE
5866 E-Mail (Date Field)
Not used.
5870 Common Key Info Writing
Writes to flash ROM the common proof for validating the device for NRS
specifications.
5870 1 Writing
5870 3 Initialize
5873 SD Card Apli.
Allows you to move applications from one SD card another. For more, see the
Printer/Scanner Manual for the B205/B209 or D007/D008.
5873 1 Move Exec
5873 2 Undo Exec
5875 SC Auto Reboot
This SP determines whether the machine reboots automatically when an SC
error occurs.
Note: The reboot does not occur for Type A SC codes.
5875 1 Reboot
Setting
5875 2 Reboot Type
5878 Option Setup
Press [Execute] to initialize the Data Overwrite Security option for the copier.
For more, see "1.16 MFP Controller Options" in Section "1. Installation".
5879 Editing Option Setup DFU
This SP is used to install the edit option card.
5907 Plug & Play Maker/Model Name
Selects the brand name and the production name for Windows Plug & Play. This
information is stored in the NVRAM. If the NVRAM is defective, these names
should be registered again.
After selecting, press the "Original Type" key and "#" key at the same time. When
the setting is completed, the beeper sounds five times.
5908* LCT Paper Size
Selects the paper size for the LCT. Use this SP after changing the paper size in the
optional LCT (i.e., after changing the side plate position for the LCT).
[0~1 / 1 / 1] North America
0: A4
1: LT
[0~1 / 0 / 1] Other Areas (Europe/Asia)
0: A4
1: LT
Note: These SPs are for future use and currently are not used.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
The machine reboots automatically when the machine issues
an SC error and logs the SC error code. If the same SC occurs
again, the machine does not reboot.
The machine does not reboot when an SC error occurs.
Data Overwrite Security (DOS) Setup
5-70
21 July 2006