Ricoh R-C4 Service Manual page 230

SERVICE PROGRAM MODE
5302 Set Time DFU
Sets the time clock for the local time. This setting is done at the factory before
delivery. The setting is GMT expressed in minutes.
[–1440~1440/1 min.]
JA: +540 (Tokyo)
NA: -300 (NY)
EU: +6- (Paris)
CH: +480 (Peking)
TW: +480 (Taipei)
AS: +480 (Hong Kong)
5307 Summer Time
Lets you set the machine to adjust its date and time automatically with the change to
Daylight Savings time in the spring and back to normal time in the fall. This SP lets you
set these items:
• Day and time to go forward automatically in April.
• Day and time to go back automatically in October.
• Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits
1st, 2nd
3rd
4th
5th, 6th
7th
8th
5307 1 Setting
5307 2 Rule Set
(Start)
5307 4 Rule Set
(End)
Meaning
Month. 4: April, 10: October (for months 1 to 9, the first digit of 0 cannot be
input, so the eight-digit setting for 002 or 003 becomes a seven-digit
setting)
Day of the week. 0: Sunday, 1: Monday
The number of the week for the day selected at the 3rd digit. If " 0" is
selected for "Sunday", for example, and the selected Sunday is the start of
the 2nd week, then input a "2" for this digit.
The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example), digit 8
should be 3 (30 minutes).
Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
5-42
21 July 2006