Ricoh R-C4 Service Manual page 116

21 July 2006
PCU Reassembly
Reassemble the PCU in this order:
Connect pawl
Frame pawls, front and rear
Set rear cover, front cover
• Never touch the lever [A] until after
the top screw has been fastened.
Screws ( x3), coupling x1
• Never press down on the top of the
PCU when you reattach the rear or
front cover.
Lower screw ( x1)
• Always install the lower screw first
to maintain the correct gap between
the rollers.
Top screw ( x1)
• Lift and lower the lever [A] to make sure that the shutter opens fully and operates
smoothly.
PHOTOCONDUCTOR UNIT (PCU)
[A]
3-25
B205R926.WMFF
B205R157.WMFF