Ricoh R-C4 Service Manual page 24

21 July 2006
Re-assembly
1. Make sure that all of the holes and tabs on are engaged at
Then push down to lock the tabs on the front and rear end of the PCU.
2. Make sure that the holes for the screws on the front and rear end of the PCU
are aligned correctly. If the holes are not aligned correctly, make sure that the
tabs at the front, rear, and left side of the PCU are engaged correctly.
Important
• Reattach the rear screws (
• Do not push down on the top of the PCU when you attach the rear and front
screws
INSTALLATION REQUIREMENTS
x2) first, then reattach the front screw (
1-11
B205I920B.WMF
, , , and .
x1).