Ricoh R-C4 Service Manual page 427

21 July 2006
1.2 SP MODE SETTINGS
After installing the machine and line adapter, change the value of SP5-816 (CSS
Function) to 1.
Check the values of the following SP modes. Ensure they are set correctly.
NOTE: SP5-507 is only for the Japanese version. Do not change.
SP No.
SP5-501-1 (PM Alarm Interval)
SP5-504 (Jam Alarm Setting)
SP5-505 (Error Alarm Setting)
SP5-508-1 (CC Call – Remain of Jam)
SP5-508-2 (CC Call – Continuous Jam Occurrence)
SP5-508-3 (CC Call - Cover Open)
SP5-508-4 (New CC Call Mode)
1.3 CHECKING ITEMS USING RSS
1.3.1 READ ONLY ITEMS
Paper end
Toner end
Staple end
Toner near end
Door open
Paper jam information
Machine condition
Paper size information
System configuration
Vsg, Vsp, Vsdp, Vt data
Fax information (Total No. of Tx, Total No. of Rx, etc)
Printer information (Total No. of print by Emulation, etc)
Related SP Modes:
SP7-001~-003, -101, -206, -506, -502~507, 002, 803, -001, 402, 403, 801
SP8-001~-006, -011~-017, -021~-027, -061~-062, -064, -071~072, -074, -111, -121, -131, -
141, -151, -161, -191~193, 195, -196, -205, -211~-216, -221, -231, -241, -251, -291, -301, -
381~-387, -391, -401~-404, -411, -421, -422, -424, -431, -441~-444, -451, -461~-464, -471,
-481, -484, -521, -522, -524, -531, -633, -643, -651, -661, -671, -681, -683, -691, -701, -741,
-781, -831, -841, -861, -871, -881, -901, -911, -941
Correct Setting
120k
3
50
1 (On)
1 (On)
1 (On)
1 (New Mode)
Item
APPENDIX-3
SP MODE SETTINGS