Ricoh R-C4 Service Manual page 229

21 July 2006
5162 App. Switch Method
Controls if the application screen is changed with a hardware switch or a software
switch.
[0~1/1]
0: Soft Key Set
1: Hard Key Set
5167 Fax Printing Mode at Optional Counter Off
Enables or disables the automatic print out without an accounting device. This SP
is used when the receiving fax is accounted for by an external accounting device.
0: Automatic printing
1: No automatic printing
5169 CE Login
If you will change the printer bit switches, you must 'log in' to service mode with this
SP before you go into the printer SP mode.
[0~1/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5179* Bypass Size Error
This SP determines whether a paper size error prompt appears when the machine
detects the wrong paper size for the job and jams during feed from the bypass tray.
[0~1/0/1]
0: Off
1: On
5212 Page Numbering
5212 3 Duplex Printout Left/Right Position
5212 4 Duplex Printout High/Low Position
SERVICE PROGRAM MODE
Horizontally positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is left, + is right.
Vertically positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is down, + is up.
5-41