SERVICE PROGRAM MODE
5120
Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0~2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121
Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or at
paper exit. Japan Only
[0~1/1]
0: Feed count
1: No feed count
5127
APS Mode
This SP can be used to switch APS (Auto Paper Select) off when a coin lock or
pre-paid key card device is connected to the machine.
[0~1/1]
0: On
1: Off
5129*
F Paper Size Selection
Selects the "F" paper size.
[0 ~ 2 / 0 / 1 step]
0: 8" x 13"
1: 8.5" x 13"
2: 8.25" x 13"
5131*
Paper Size Type Selection
Selects the paper size (type) for both originals and copy paper.
[0~2 / DIP SW setting / 1 step]
0:Japan
1:North America
2:Europe
After changing the setting, turn the copier off and on. If the paper size of the archive
files stored on the HDD is different, abnormal copies could result. Ask the customer to
restore the archive files.
5150
Bypass Length Setting
Sets up the by-pass tray for long paper.
[0~1/1]
0: Off
1: On. Sets the tray for feeding paper up to 600 mm long.
With this SP selected on, paper jams are not detected in the paper path.
5-40
21 July 2006