Pentair FLECK 2750 NXT Installer Manual page 97

Parameter
AUX. 1: CYCLE
BASED
AUX. 1: TIME
BASED - START
TIME #1 duration minus
AUX. 1: TIME
BASED - END
TIME #1 + 1 minute until
AUX. 1: TIME
BASED - START
TIME #2
duration minus
AUX. 1: TIME
BASED - END
TIME #2
#2 + 1 minute
AUX. 1: VOLUME
BASED –
VOLUME - L
AUX. 1: VOLUME
BASED -
DURATION
Ref. MKT-IM-026 / C - 15.12.2020
Options
SP Service position
BW Backwash position
BD Draw and slow rinse
RR Rapid rinse position
RF
SB Pause position
0 to total
regeneration
1 minute
from start
time#1
total
regeneration
duration
OFF
End time #1
+ 1 minute to
total
regeneration
1 minute
OFF
From start
time
until the total
regeneration
duration
0 to MAX
1 to 7200
Installer manual Fleck 2750 NXT/NXT2 - Programming
Definition
Only displayed if "Cycle based" is
chosen for auxiliary 1;
Activate or de-activate for each
position (
position
= activated).
Refill position
Minute Only displayed if "Time based" is
chosen for auxiliary 1.
Minute
Minute Only displayed if "Time based" is
chosen for auxiliary 1 and END
TIME #1< total regeneration
duration minus 1 minute;
Range depend on Start and end
time #1 values.
Minute Only displayed if "Time based" is
chosen for auxiliary 1 and START
TIME #2 ON;
Range depends on Start and end
time #1 values.
Litre Only displayed if "volume based" is
chosen for auxiliary 1;
Volume range depend on capacity;
Even if maximum theoretical
programmable value is 999999 the
controller will take the unit
capacity as maximum volume.
Second Only displayed if "volume based" is
chosen for auxiliary 1;
Even if maximum theoretical
programmable value is 9999 the
controller will take 7200 as
duration.
Note
= deactivated;
97 / 170