Installer manual Fleck 2750 NXT/NXT2 - Maintenance
9.4.7
Cams replacement
Info
This procedure is valid for AC and DC motor assemblies.
1. Remove the micro-switches, see Micro-switches replacement [
→
Page 145].
2. Using pliers, remove the circlip (1) and free the arm (2).
3. Using pliers, remove the pin(s)
(4
and/or 5) and the cam(s)
(3
and/or 6).
4. Replace the cam(s)
(3
and/or 6).
5. Reverse above procedure steps to rebuild.
Ref. MKT-IM-026 / C - 15.12.2020
147 / 170