Pentair FLECK 2750 NXT Installer Manual page 69

Parameter
REGENERATION 00:00:00
TIME to 23:59:59
CYCLE 1
04:00:00
CYCLE 2
to 04:00:00
CYCLE 3
to 04:00:00
CYCLE 4
to 04:00:00
CYCLE 5
to 04:00:00
AUXILIARY
RELAY
Disabled
AUX RELAY 00:00:00
OUTPUT START to 18:00:00
AUX RELAY 00:00:00
OUTPUT END to 18:00:00
CHEMICAL
PUMP
Disabled
Ref. MKT-IM-026 / C - 15.12.2020
Options Definition
02:00 AM (default)
OFF to 00:10:00 (default)
OFF 01:00:00 (default)
OFF 00:10:00 (default)
OFF 00:12:00 (default)
OFF OFF (default)
Enabled
(Default)
Enabled
(Default)
Installer manual Fleck 2750 NXT/NXT2 - Programming
Hour Regeneration time will not appear
unless regeneration day override is on
or vale is programmed as time clock
or meter delayed.
Use the SHIFT button to move to the
left.
Use the SHIFT button to move to the
left.
This screen will only display when
cycle 4 is not OFF.
Use the SHIFT button to move to the
left.
- Not compatible with chemical pump
activation.
Use the SHIFT button to move to the
left.
Hour Only displayed if auxiliary relay is
enabled in previous screen.
Auxiliary relay will only display if
chemical pump is OFF for system
types 6 & 7.
Use the SHIFT button to move to the
left.
- This screen will only display if valve is
programmed volumetric.
Not compatible with auxiliary relay
activation.
For system types 6 & 7, this screen
will only display on the lead (#1) unit if
auxiliary relay is OFF.
For all other system type, it will
display for all units.
Note
69 / 170