Installer manual Fleck 2750 NXT/NXT2 - Programming
6.2.5.14 Volume override/ Volumetric
Set the volume of water between 2 cleaning cycles.
Info
Available only for filter metered systems.
1. Set the volume override with
ð Can be adjusted from 0 to 9.999.999 litres;
2. Press
to validate the selection and advance to the next
parameter.
6.2.5.15 Hardness units
Set hardness unit to be used.
Info
This screen is displayed only for metered systems, if units mode programmed is metric
(Units [
Page 103]).
→
1°F = 10 mg/L CaCO
Options:
• mg/L (default);
• °DH: German;
• °FTH: French;
• °EH: English.
1. Set hardness unit with
2. Press
to validate the selection and advance to the next
parameter.
6.2.5.16 Capacity
Set the system capacity of the tank where the valve is installed.
104 / 170
,
and ;
= 10ppm CaCO
= 0.56°dH = 0.7 °eH
3
3
and
;
Ref. MKT-IM-026 / C - 15.12.2020