Pentair FLECK 2750 NXT Installer Manual page 116

Installer manual Fleck 2750 NXT/NXT2 - Programming
Info
Available only for multi-valves systems.
The ability to transmit settings from one unit to all other connected units. After push
settings are complete, you may still make unique changes to individual units.
Options:
• off;
• on (default).
1. Select the push settings with
2. Press to validate the selection and advance to the next
parameter.
6.2.5.30 Save as non-factory
Info
Parameters set on master programming menu can be saved as a non-factory program.
This saved program will be restorable from the reset menu.
Options:
• off (default);
• on.
1. Select save as non-factory option with
2. Press to validate the selection and advance to the next
parameter.
6.2.5.31 Lock options
Select the desired lock settings option (off, time based, delayed, or enter code).
Info
Lock Settings prevents unexpected access to master programming.
Once lock settings option is activated, the controller returns to normal service display.
The next time accessing the menu, the controller will call for either a password, or will
grant access to menu only if programmed conditions are fulfilled.
Contact your supplier for more information.
Options:
• off (default);
• delayed;
• enter Code;
• time Based.
116 / 170
and ;
and ;
Ref. MKT-IM-026 / C - 15.12.2020