12.10
Removing the lower triple clamp
(EXC‑F Six Days)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the right radiator and detach
the wiring harness.
–
Remove screws
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Remove screw
–
Remove screw
E00382-10
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
E00383-10
12 SERVICE WORK ON THE CHASSIS
(
p. 108)
(
p. 64)
p. 74)
1
and hang the voltage regulator to the side.
2
.
3
.
4
5
and protective ring
.
p. 119)
p. 62)
67