Removing The Lower Triple Clamp (Exc-F Eu/Br); Removing The Lower Triple Clamp (Exc-F Six Days) - KTM 250 EXC-F 2021 Owner's Manual

12.9 Removing the lower triple clamp
12.10 Removing the lower triple clamp
(EXC‑F EU/BR)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Loosen screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
V01785-10
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01757-10
(EXC‑F Six Days)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it
aside.
V01787-10
SERVICE WORK ON THE CHASSIS 12
( p. 106)
( p. 63)
p. 72)
1
.
2
.
3 4
and protective ring .
( p. 106)
( p. 63)
p. 72)
1
.
2
.
p. 120)
p. 61)
p. 120)
p. 61)
65