Buell P3 2003 Service Manual page 59

HOME
3770
Figure 1-30. Pumping Fork Oil
6. See Figure 1-30. Remove the fork oil by pumping the fork
leg and rod 8-10 times until the rod moves freely.
NOTE
The recommended fork oil is hydraulic fork oil type "E".
7. Pour 9.2 oz. (272.1 ml) fork oil into fork.
8. Install lower spring seat and spring collar.
9. Coat a new O-ring with fork oil or sealing grease.
10. Install new O-ring onto spring seat.
3769
Figure 1-31. Compressing Spring Seat
11. See Figure 1-31. Push down on spring seat past groove
to install stopper ring. Stopper ring will lock into groove
when installed correctly.
1-28 2003 Buell P3: Maintenance
3768
Figure 1-32. Slider Tube Cap
12. See Figure 1-32. Install slider tube cap.
13. Install front forks. See 2.17 FRONT FORK.