Buell P3 2003 Service Manual page 126

HOME
CAUTION
Do not to scratch the slide pipe or the outer tube.
Scratched tubes may leak fork oil and then must be
replaced.
3775
Figure 2-74. Removing Dust Seal
9. See Figure 2-74. Remove the dust seal and the retaining
ring from the slider tube.
3773
1
2
3
1. Oil seal
2. Back-up ring
3. Guide bushing
Figure 2-75. Removing Slider Tube
10. See Figure 2-75. Pull the slider tube out of the slider
assembly. Remove oil seal, back-up ring and guide bush-
ing.
3776
Figure 2-76. Removing Slide Bushing
11. See Figure 2-76. Remove the slide bushing by prying the
slide bushing at the split.
2003 Buell P3: Chassis 2-47