Siemens 8DJH Series Installation And Operating Instructions Manual page 94

Installation
Principle of installation for
cable-type current
transformers
Installation of cable-type
current transformers
94
Fig. 67: Cable connection with cable-type current
transformers type 4MC7033
Remove the cable compartment cover.
If necessary, remove the lower cross member of the switchgear frame.
Take the supplied cable-type current transformers out of the cable compartment.
Push the cable-type current transformers on the high-voltage cables.
Mount the cable plugs according to the manufacturer's instructions.
Position the pre-assembled transformer mounting plates at the cable bracket in such
a way that all three cable-type current transformers can be mounted.
Lead the cable shield back through the transformer,
and fasten it at the earthing point.
Swing the high-voltage cables in together with the cable-type current transformers,
and connect the cable plugs to the cable feeder
(see Page 83, "Connecting high-voltage cables").
Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9
a Cable plug
s
Cable bracket
d
Transformer mounting plate
f
Cable-type current transformer
g Cable shield