Siemens 8DJH Series Installation And Operating Instructions Manual page 84

Installation
Connecting feeder cables
84
Fig. 55: Cable connection for transformer feeders
Fig. 56: Cable connection for ring-main and
circuit-breaker feeders
Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9
a Phase L1: Make Euromold,
type K400 TB as cable T-plug *
s
Phase L2: Make Euromold,
type K400 TB as cable T-plug *
d Phase L3: Make Euromold,
type K400 TB as cable T-plug *
f
Earthing connection for the cable
shield and the plug housing
g
Cable bracket
h Cable clamp
j Cross member (removable)
* The plug types shown here as an
example can be ordered via
the accessories.
a
Phase L1: Make Euromold,
type K400 LB as cable T-plug *
s Phase L2: Make Euromold,
type K400 TB as cable T-plug *
d
Phase L3: Make Euromold,
type K400 TB as cable T-plug *
f Earthing connection for the cable shield and
the plug housing
g
Cable bracket
h
Cable clamp
j
Cross member (removable)
* The plug types shown here as an example can
be ordered via the accessories.