Siemens 8DJH Series Installation And Operating Instructions Manual page 66

Installation
66
ATTENTION!
Danger due to swinging switchgear. The center of gravity is not always located under
the fixing point.
Lift the switchgear slowly.
Keep the safety distances.
Do not transport more than a maximum width of 2000 mm and a maximum height
of 2.30 m in a block.
Fig. 37: Switchgear transport with crane or fork-lift truck
Lift or lower just slowly, as the switchgear will swing into the center of gravity when
it is lifted.
While lifting, observe parts laid inside such as e.g. cable-type transformers,
connecting cables.
Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9