500-8067.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * Revision 03
Fig. 45: Mounting the lower partition (front view)
The folding edges of the partition point to the rear.
Fig. 46: Mounting postiion of the lower
partition (rear view)
Then mount the cable bracket in theT panel.
Take the cable bracket out of the supplementary equipment and fasten it at the
necessary height. To do this, use M6 Torx bolts.
Tightening torque: Maximum 12 Nm.
a
Upper partition
s
Lower partition
d
Earthing busbar
Installation
75