Siemens 8DJH Series Installation And Operating Instructions Manual page 91

Fig. 63: Inserting the front floor cover and the rubber sleeves (switchgear up to 16 kA)
a Rubber sleeves for cable entry (diameter 70 mm)
s If required, use rubber sleeves for control cables (diameter 56 mm) /
screened cable plugs
Cable installation in
switchgear with pressure
absorber up to 21 kA
500-8067.9 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * Revision 03
Mount the cross member and the cable compartment cover.
Fig. 64: Switchgear with pressure absorber up to 21 kA
d Front floor cover
Installation
a
Cable compartment cover
s Cross member
d Front plate of
the pressure absorber
91