Adding Paper <Printing Media; Paper Tray / Sheet Bypass - Panasonic DPC322 Operating Instructions Manual

Adding Paper <Printing Media>
ATTENTION
● If you wish to change the preset paper size used in the Paper Tray, contact your authorized Panasonic dealer.
● Do not place the following types of printing media into the paper tray, use the Sheet Bypass instead.
Ex: Transparencies, Label, Envelope, Curled paper
● When changing the paper type (Plain, Glossy or Recycled) in the Paper Tray, refer to General Settings (Key
Operator) in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
● Fan the paper and straighten the stack when loading paper to avoid the double feeding or paper jam.
■ ■ ■ ■ ■ Paper Tray
1
Open the Paper Tray.
2
Fan and align the paper together, and then
load paper with printing side facing up.
Add Paper
Paper Capacity : 550 sheets (80 g/m
Paper Weight
3
Close the Paper Tray.
64
Paper Tray
Upper Limit Indicator
2 )
2
: 64 - 105 g/m
Paper Tray
■ ■ ■ ■ ■ Sheet Bypass
1
Open and pull out the Sheet Bypass.
Sheet Bypass
2 Load paper with printing side facing
down.
● Align the paper together, and then
place them on the Sheet Bypass.
● When setting A4 or B5 size paper,
portrait orientation is recommended.
Setting in portrait makes the copy
time shorter than in Landscape.
Portrait paper will be rotated 90
degrees automatically when copying
the landscape original.
Paper Capacity : 50 sheets (A4 / 80 g/m
Until it stops
2 )