Table of Contents
Advertisement
Installation
C AUT ION
2-8
The BootDisk, you are able to create while the installation, send a "Boot
completed" command to the PTC and restarts the DUT. So you don't have
to Power cycle the DUT manually.
To install the software on the controlling host PC:
1 Log in to the PC.
You need administrator rights to install the software.
2 On the CD, look for the zip file named "Agilent E2969A Series for PCI
Express <version> - Build <date>.exe". and start it.
3 Run the executable
This install script installs all necessary software components and
drivers onto your system.
4 Connect the PC with the PTC through the USB cable and power up the
PTC (which means, power up the target platform).
The card should now be detected automatically (depending on the system
speed this may take a while).
Installing the Hardware
The test card may become hot during use. Do NOT touch any of the
components on the test card. Do NOT place the test card on flammable
surfaces during or after operation.
To install the PTC in the target platform:
1 Power down the target platform.
E2969-91020
Installing the Hardware
Advertisement
Table of Contents
