Remote Emergency Stop Kit - Kohler KD700 Operation

Industrial generator sets
Table of Contents

Advertisement

Ground
24VDC Power Supply
(9-40 VDC)
0-20 mA
PT100
K
Figure 102 Connections
4.5

Remote Emergency Stop Kit

The emergency stop (E-stop) kit allows immediate shutdown of the generator set from a remote location. If the emergency stop
switch is activated, the EMERGENCY STOP lamp lights and the unit shuts down immediately, bypassing the engine cooldown
cycle. Before attempting to restart the generator set, reset the emergency stop switch and reset the generator set by pressing
and holding the OFF/RESET button for 3 seconds.
Two emergency stop kits are available. See the Remote Emergency Stop Switches figure and the following instructions.
Remote Emergency Stop Switch
Figure 103 Remote Emergency Stop Switches
86
2X
+
24V
-
+
-
1
+
2
-
3
4
+
2
-
3
31613391201
Insert lockout/tagout device
through these holes
Shielding Connection
Note:
Cable shields must be grounded as shown.
Lockable Emergency Stop Switch
TP-7070
11/22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd4000

Table of Contents