Figure 80
Prime Power Switch Connections
6.1.11 Remote Emergency Stop Kit
The emergency stop (E-stop) kit allows immediate shutdown of the generator set from a remote location. If the emergency stop
switch is activated, the EMERGENCY STOP lamp lights and the unit shuts down immediately, bypassing the engine cooldown
cycle. Before attempting to restart the generator set, reset the emergency stop switch and reset the generator set by pressing
and holding the OFF/RESET button for 3 seconds.
Two emergency stop kits are available. See Figure 81 and the following instructions.
144
APM402 / DEC 3000 Controller
Toggle switch shown in the
prime power mode off
position (contacts open)
To Engine Harness
Prime
Power
Switch
TP-6694
6/22