Restart; Display Cleaning - Kohler KD700 Operation

Figure 57 Selecting a Module from a Remote HMI

2.11.4 Restart

Press the Restart icon to bring the window shown in Figure 58 to the front. Confirm the restart by pressing OK, or cancel the
procedure by pressing Cancel.
This operation will trigger a complete restart of the HMI module.
Figure 58 Restart Window

2.11.5 Display Cleaning

Before wiping the screen, press the Display cleaning icon. The window shown in Figure 59 appears.
The entire screen is disabled for 20 seconds, allowing you to clean the touch panel.
After 20 seconds, the Applications screen appears again.
Figure 59 Display Cleaning Window
54 TP-7070 11/22