Controller Features - Kohler KD700 Operation

1.3

Controller Features

The controller features include a 307 mm (12.1 inch) touchscreen with backlight and wide viewing angle (140 ° horizontal and
vertical) and terminal blocks for input and output connections. See Figure 3 for an illustration of the controller front panel and
the customer connection area. Controller features include:
•
12-inch touchscreen with backlight and wide viewing angle for easy local access to data.
•
System settings are password-protected.
•
Measurements selectable in metric or English units.
•
User language is selectable (English or French).
•
Graphic displays show generator set mechanical values including operating hours, fuel level (where applicable), battery
voltage, coolant temperature, oil pressure, and oil temperature.
•
Meter displays provide a visual representation of generator electrical values including power (kW), power factor,
reactive power (kVAR), frequency, voltage, and current (amps).
•
Two USB ports allow connection of a flash drive, mouse, or keypad.
•
Electrical data, mechanical data, and system settings can be saved to a flash drive.
•
Recording feature allows data collection of key values.
•
Ethernet port allows connection to a PC type computer and/or Ethernet switch.
•
Serial (RS-485) port.
•
The controller supports Modbus
•
Real time clock with battery back-up.
•
See the controller specification sheet or operation manual for input and output specifications.
APM802 controller human-
machine interface (HMI)
USB ports, qty.
2 (on the back
of the HMI)
Wiring harness
connection
Terminal block TB10 for accessory
connections
Note:
Covers have been removed for illustration.
Figure 3 APM802 Controller and Customer Connection Box
®
Modbus is a registered trademark of Schneider Electric.
16
®
RTU and TCP protocols.
Emergency stop
switch
Controller
touchscreen
Key switch
Manual start/stop
button
Generator set
mechanical data
240 VAC/60 Hz
power supply
connection
(required)
11601000945
Fault indicator/display
button
Generator set electrical values
Human-Machine Interface (HMI)
Mode selection
switch
TP-7070 11/22