Firmware Update - Kohler KD700 Operation

2.11.6 Firmware Update

Pressing the Firmware update icon carries out an update of the HMI firmware.
The update requires that a USB key is inserted into the port provided on the bottom of the HMI. See Figure 60.
USB Ports
Figure 60 USB Port Location on HMI Module
Firmware Update Procedure
1. Tap the selection field area (Figure 61) and select the desired software version.
2. Press OK to start the software update operation.
Figure 61 Firmware Update Screen
At the end of the update, the HMI will automatically restart.
For this update operation, the USB key must contain the following type of directory: E:\apm802\update. The software versions
(or firmware) are of the following type: IHM_APM802_V1_x_x.z208.
Note:
The HMI firmware version number must match the firmware version installed in the base module.
TP-7070 11/22 55