Menu 2-Measurements - Kohler KD700 Operation

Screen 1.8 Parameters
The 1.8-Parameters screen is used to set the engine speed (RPM). The speed can be adjusted by ±10RPM.
Figure 73 Parameters Screen

2.12.2 Menu 2-Measurements

The 2-Measurements menu can be accessed via the button with the same name. This gives access to the screens listed below.
•
Screen 2.2-Mechanical
•
Screen 2.3-Generator electrical
•
Screen 2.6-Harmonics
Note:
The measurements menus are view-only; no modifications are possible from these menus.
Screen 2.2-Mechanical
The 2.2-Mechanical screen gives an overview of all the mechanical values for the associated generator.
Separation of the mechanical
values into three categories
Figure 74 Mechanical Screen
64 TP-7070 11/22