Ladder Tools - Kohler KD700 Operation

2.11.8 Ladder Tools

Ladder is a standardized graphic language which is very similar to a ladder diagram. Implemented in the base module of the
APM802, it is used to define the PLC functions required for specific functions.
Pressing the Ladder tools icon takes you to the screen shown in Figure 63. See the Applications Screen figure for the location
of the Ladder tools icon on the applications screen.
Network access keys
Figure 63 Ladder Screen
To exit the Ladder screen, press the Applications button or the Home button on the top bar.
Generally speaking, there will be at least 2 networks:
•
The inputs network (accessed via the Inputs key)
•
The outputs network (accessed via the Outputs key).
Depending on the complexity of the application, there may be an intermediate network.
The Inputs network defines all the input equations for the system. These inputs correspond to the physical inputs for the base
module.
The #1 network defines all the intermediate equations used for the connection between inputs and outputs.
The Outputs network defines all the output equations for the system. These outputs correspond to the physical outputs for the
base module. See Figure 65.
In all networks, press on the contact or the coil to access more information.
TP-7070 11/22
Press one of these button to exit the
ladder screen
57