2.12.3 Menu 3-History
The 3-History menu can be accessed via the key with the same name. It gives access to Screen 3.1-Archiving.
Screen 3.1-Archiving
The 3.1-Archiving screen is used to store certain parameters in the controller's memory.
Figure 77
Archiving Screen
List of archived parameters:
Energy Meters
•
Active energy (in MWh)
•
Reactive energy (in Mvarh)
Operating hours
•
Total (in hours)
•
In override mode (in hours)
Starter
•
Number of starter attempts
If the Operator is logged in with their access code or if the User has entered the code 1966 (access limited to ten minutes), then
opposite each parameter, on the right of the screen, an Initialization button appears. See Figure 77.
Each button is used to reset the parameter concerned to zero or to initialize to a given value.
66
Press the Initialization button next to
an item to reset the history to zero.
(Operator login required)
TP-7070
11/22